aluminum scaffolding tower


Industrial Tower

Industrial Tower Span Frame Double Width

Industrial Tower Ladder Frame Double Width

Industrial Tower Span Frame Single Width

Industrial Tower Ladder Frame Single Width

Standard Stabiliser Unit locking collar

Our Industrial Aluminium Scaffold Tower  complies fully with:

A safe stable tower which can be built using the 3T (through the trap) method and is suitable for all industrial applications in Ireland.

Internal ladder and hatch for the safety of the operator. These scaffold towers are available in single 850mm and double 1450mm widths and are also available in 2 different lengths 1800mm and 2500mm.

The tower is supplied with large 150mm lockable castors and outriggers for extra stability and maneuverability. The Mobile Aluminium Scaffold Tower has a maximum platform height of 12.2m

a total of nearly 40 feet.

As a responsible vendor we are aware of our statutory obligations in relation to providing both documentation and information with any tower we sell.


Available in 1800mm length and 2500mm lengths.

Available in Single Width 850mm and Double Width 1450mm.

Available in platform heights from 1.2m to 12.2m (Larger heights are for internal work only).

Smooth and ribbed tubing on braces for quick identification.

Choice of toeboards, standard wooden or new aluminium folding unit.

Fully complies with latest regulations, product standards and requirements – including the 3T method of assembly.

Dual brake on/off system on each of the 4 x 150mm castors.

Large, articulated rubber feet on all stabilisers.

Wide ladder with hexagonal rung for easier climb & additional safety.

Quick release pull rings with stainless steel pin on all bracing.

Extruded tube thickness of 1.6mm. Some competitors are using as little as 1.2mm thick tubing.

Tubing is welded NOT crimped.

Extruded tube diameter of 50.8mm.

Spring Steel lock clips on each tower frame.

Extruded Aluminium Ladder Stile and rung. The ladder section is an integral part of the frame.

For safety the platform has a trapdoor for climbing through & when lowered it becomes part of the platform.

aluminum scaffolding tower

Tube Diameter: 1.5 inch aluminium tubing

 Aluminium does not rust, unlike steel alternatives

 Quick erect scaffold tower

 High strength aluminium welded frames

 Snap out base unit

 Fits easily into most vans for easy storage

 Dismantle and transport with no tools required

 Can be used indoors or outdoors

 Passed stringent & rigorous testing

 For extra safety, frames are ribbed for non-slip

 The platform is made from a non-slip plywood


We are Ireland’s leading provider of mobile scaffolding solutions. So if you are looking to hire one of our mobile scaffolding units or you would like to invest in your own scaffolding system

In the challenging world of mobile height access, Alloy Access is a proven industry leader thanks to our innovative designs, high quality manufacturing and comprehensive customer care. We have been providing effective and efficient access equipment to all industries.

With an impressive product portfolio, we are confident in our ability to provide a solution to any mobile height access requirement. We specialise in mobile work platforms and mobile scaffolding solutions that are easy to use, durable and meet or exceed Irish Standards for safety.

Mobile access towers are professional equipment that no painter or fitter wants to be without. No wonder, as there is barely another climbing aid that is so flexible. Mobile access towers with a modular design are often folding, and can therefore be set up and packed together quickly and easily. Furthermore, they are easy to transport. They are still fast to move from one workplace to another even after they have been set up. If you have to perform tedious tasks at great heights, then mobile access towers are a suitable solution. And their compliance with the DIN EN 4422 standard ensures they are a safe solution too.

DIN EN 1004 regulates the use of approved materials for producing mobile working platforms and the safety-relevant requirements of the individual components. Furthermore, they call for detailed instructions to ensure working on mobile access tower is safe. There are a number of points that you and your employees need to observe.

The content and instructions in the assembly and usage instructions issued by the respective scaffold manufacturer must be observed.

DIN EN 1004 specifies that the maximum permissible height of mobile access towers totals 8 metres outside (there may be wind loads) and 12 metres in closed rooms. However, mobile access towers may only be erected to the height specified in the assembly instructions included with them.

Mobile access towers may only be set up, packed up or modified by specialist personnel who have receive instructions, and when supervised by a specialist. A specialist is a person who has the specialist knowledge necessary for mobile working platforms. The requirements include professional training, professional experience or a corresponding professional activities performed recently.

Only original manufacturer components are permitted.

The ground on which mobile access towers are placed must be level and have a high load bearing capacity.

If vehicles are moving around the scaffolding, then the scaffolding must be secured to ensure collisions cannot occur.

Each mobile access tower must be inspected by a person qualified to perform this inspection – before it is used. The result must be documented. The inspection allows you to ascertain that the mobile access towers has been secured against rolling away, and has been set up vertically.

Mobile access towers may not be moved as long as persons or objects are on them. They should only ever be pushed over level surfaces due to the danger of tipping.

Scaffolds may only ever be accessed and exited at the points provided for this purpose. Climbing from mobile access towers onto other climbing aids or onto buildings is not permitted.

The height of the deck surface may not be enlarged by using ladders, crates or other items of equipment.

Access hatches must be closed immediately after use.

No lifting tackle may be used on mobile access towers.

Incidentally: Even if your mobile access towers were provided to you already assembled, you are still obliged to inspect them for defects before use, and to document everything.

Which mobile access tower would you prefer?

You will find that our product portfolio includes folding basic scaffolding and professional access towers and safety access towers for working at great heights. You can filter the category by the preferred working height or by the required platform width and length in order to find the mobile access tower that is best suited to you.

For full details on how to use this scaffold tower, download our user instruction manual


Ribbed rung tubing for increased grip

3T – Through the Trap build method

Primed brace claw mechanism

Ease of brace identification: Red – horizontal / Blue – diagonal

Horizontal braces used as guardrails

Floating frame spigots

Self cleaning adjustable legs

Castors with compact trail/no trail positive locking brake mechanism

Deck board edge protection provided by aluminium deck profile

Easy to use toeboard system

Lift shaft/confined space stabiliser available

Lighter weight than BoSS with castings

More rigid construction

Clean lines

Fully compatible with BoSS with castings - you can mix and match

Manufactured to European Standard EN 1004, for industrial use

Integral ladders with 250mm easy climb rung spacing

500mm frame rung spacing in compliance with Work at Height Regulations

Send us a Message

Our team is responsive to customer needs, no matter when and where. According to the special requirements of customers or buyers, to provide a full